prikaz prve stranice dokumenta PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA
Access restricted to students and staff of home institution
undergraduate thesis
PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA
2020. urn:nbn:hr:153:508199
Grgić, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Grgić, M. (2020). PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:508199

Grgić, Marko. "PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:508199

Grgić, Marko. "PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:508199

Grgić, M. (2020). 'PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 01 March 2025, https://urn.nsk.hr/urn:nbn:hr:153:508199

Grgić M. PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2025 March 01] Available at: https://urn.nsk.hr/urn:nbn:hr:153:508199

M. Grgić, "PRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:508199

Please login to the repository to save this object to your list.
Metadata
TitlePRIMJENA AUTOMATA FLEX TRACK 45 KOD ELEKTROLUČNOG ZAVARIVANJA
Title (english)APPLICATION OF AUTOMAT FLEX TRACK 45 IN ARC WELDING PROCESS
AuthorMarko Grgić
MentorZlatko Tonković (mentor)
MentorIvan Samardžić (komentor)
Committee memberZlatko Tonković (član povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberDejan Marić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je analizirana povijest zavarivanja, postupci zavarivanja te automat Flex Track 45 Pro. Cilj ovog završnog rada bio je opis automata Flex Track 45 Pro te prikaz njegove primjene u praksi. Automat je uređaj koji omogućava brže i kvalitetnije zavarivanje. Također sa ovim automatom mogu se zavarivati razne površine jer njegova izvedba vodilica omogućava lako, jednostavno i precizno kopiranje površine. U ovom radu radilo se testiranja automata Flex Track 45 PRO u funkciji sa TPSi izvorom za MIG/MAG zavarivanje. Cilj je bio prikazati kako se koristi automat te kakva je njegova tehnička izvedba. Može se vidjeti da je automat vrlo jednostavan za uporabu i da prilikom njegovog korištenja zavarivač nema nikakvih poteškoća. Upravljač sa displejom koji je također osjetljiv na dodir omogućava brz i lak izbor svih parametara tijekom zavarivanja. Također dodatna stvar koja olakšava zavarivanje su tipke za brzu kontrolu, preciznije, tipke F1,F2,F3 i F4. Na te tipke može se programirati bilo koja od karakteristika, u našem slučaju to su bili pomaci po osima.
Abstract (english)
This paper analyzes the historyof,welding welding procedures and the Flex track 45 Pro welding carriage. The objective of this final paper was to describe the Lex track 45 Pro welding carriage and demonstrate its application. The welding carriage is a device wiche enables faster and higher-quality welding. Additionall, this welding carriage can be used to weld different surfaces given that rail system enabless easy, simple and preuise surface scanning. This paper performed tests on the Flex Track 45 Pro with the TPSi power supply for MIG/MAG welding. The objective was to show how to operate the welding carriage and demonstrate itstechnical performance. Iti s evident that the carriage is easy to use and that the welder has no problems operating the carriage. The controller with a touch-screen display enables a fast and easy selection of all parametars during welding. Faster welding is also possible due to fast control keys, i.e. F1,F2,F3 and F4 keys. Any features can be programed into those keys, and in our case we made axis movments.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:508199
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-13 06:46:13