prikaz prve stranice dokumenta Postupci izrade ozubljenja
Access restricted to students and staff of home institution
undergraduate thesis
Postupci izrade ozubljenja
2020. urn:nbn:hr:153:519568
Madžarević, Marija
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Madžarević, M. (2020). Postupci izrade ozubljenja (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:519568

Madžarević, Marija. "Postupci izrade ozubljenja." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:519568

Madžarević, Marija. "Postupci izrade ozubljenja." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:519568

Madžarević, M. (2020). 'Postupci izrade ozubljenja', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 09 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:519568

Madžarević M. Postupci izrade ozubljenja [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 09] Available at: https://urn.nsk.hr/urn:nbn:hr:153:519568

M. Madžarević, "Postupci izrade ozubljenja", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:519568

Please login to the repository to save this object to your list.
Metadata
TitlePostupci izrade ozubljenja
Title (english)Toothing processes
AuthorMarija Madžarević
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog rada su postupci izrade ozubljenja. Na početku u uvodu iznesen je značaj zupčanika u današnjoj uporabi i samoj proizvodnji. Zatim slijedi pregled postupaka izrade ozubljenja. Zupčanici se nakon izrade podvrgavaju završnoj obradi radi boljih svojstava, stoga je prikazano stanje površine te postupci poboljšanja kvalitete površine. Nadalje, opisani su alati koji se koriste pri izradi, a nakon toga slijede naprave i načini stezanja obradaka. Na kraju je zaključak i popis literature koja je korištena.
Abstract (english)
The subject of this paper is the method of making gears. In the introduction, the significance of the gears in today's use and production is highlighted. Then follows a review of the procedures for making gears. After making the gears, they are subjected to finishing procedure for better properties, therefore the surface condition and the surface quality improvement are shown. After that the tools used in the design are described, followed by the devices and the clamping methods of the workpieces. The conclusion and the list of used literature is written in last part of the paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:519568
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-02 12:53:17