prikaz prve stranice dokumenta Primjena normalizacije u proizvodnji kovanih dijelova
Access restricted to students and staff of home institution
undergraduate thesis
Primjena normalizacije u proizvodnji kovanih dijelova
2016. urn:nbn:hr:153:324458
Čeple, Leon
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Čeple, L. (2016). Primjena normalizacije u proizvodnji kovanih dijelova (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:324458

Čeple, Leon. "Primjena normalizacije u proizvodnji kovanih dijelova." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:324458

Čeple, Leon. "Primjena normalizacije u proizvodnji kovanih dijelova." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:324458

Čeple, L. (2016). 'Primjena normalizacije u proizvodnji kovanih dijelova', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:324458

Čeple L. Primjena normalizacije u proizvodnji kovanih dijelova [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:153:324458

L. Čeple, "Primjena normalizacije u proizvodnji kovanih dijelova", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:324458

Please login to the repository to save this object to your list.
Metadata
TitlePrimjena normalizacije u proizvodnji kovanih dijelova
Title (english)THE USE OF NORMALIZATION IN THE PRODUCTION OF FORGED PARTS
AuthorLeon Čeple
MentorŠtefanija Klarić (mentor)
MentorAntun Stoić (komentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberAnte Pranić (član povjerenstva)
Committee memberValnea Starčević (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je postupak primjena toplinske obrade kovanog dijela (vilica sa batićem), koja čini sastavni dio lanaca dalekovodnih stupova preko kojih se prenosi električna energija. Predmet rada je proizvod tvtke Unidal d.o.o. za proizvodnju otkivaka. Za izradu „vilice sa batićem “ potrebno je nakon provedbe određenih tehnološki operacija (sječenje, zagrijavanje na temperaturu kovanja, kovanje i obrezivanja) provesti i operaciju toplinske obrade normalizacije, u svrhu smanjenja naprezanja i dobivanja finije strukture materijala, čime se postižu i bolja mehanička svojstva proizvoda. Normalizacija se provodi tako da se materijal zagrije na temperaturu 840°-870°C, drži na toj temperaturi neko vrijeme i zatim hladi (na zraku, pomoću ventilatora ili puštanjem zajedno s peći da se ohladi).
Abstract (english)
Subject of this final thesis is a procedure of applying heat treatment to forged piece (fork with a bat), which is a part of a chain of transmission poles that are used to transfer electical energy. Object of the paper is a product of the company "Unidal d.o.o. za proizvodnju otkivaka". For the production of "fork with a bat" is necessary, after making a few tehnical operations (cutting, heating to a temperature level for forging, forging, final cutting), to carry out the operation of heating process (normalization). That is important because of the strain reduction and getting a finer structure of the material, which improves mecanical performances of the product. Normalization is done by heating the material to 840 C – 870°C, holding it for a while and than cooling it ( air cooled, cooled by fan, letting it cool down together with a furnace).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:324458
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-10-07 07:53:31