prikaz prve stranice dokumenta UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA
Access restricted to students and staff of home institution
master's thesis
UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA
2016. urn:nbn:hr:153:247422
Kentržinski, Matija
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Kentržinski, M. (2016). UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:247422

Kentržinski, Matija. "UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:247422

Kentržinski, Matija. "UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:247422

Kentržinski, M. (2016). 'UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 10 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:247422

Kentržinski M. UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 10] Available at: https://urn.nsk.hr/urn:nbn:hr:153:247422

M. Kentržinski, "UTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:247422

Please login to the repository to save this object to your list.
Metadata
TitleUTJECAJ DULJINE PREKLOPA NA SVOJSTVA LIJEPLJENOG SPOJA
Title (english)INFLUENCE OF OVERLAP LENGTH ON PROPERTIES OF BONDED JOINT
AuthorMatija Kentržinski
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberZlatko Tonković (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U teorijskom dijelu rada kratko je opisana podjela postupaka spajanja materijala. Postupak lijepljenja je detaljnije opisan, gdje su obrađene teme vrste i podjele ljepila, izbora ljepila, faktora utjecaja na čvrstoću ljepila, proračuna jednostrukog preklopnog lijepljenog spoja te prednosti i nedostaci korištenja ljepila za spajanja materijala. U eksperimentalnom dijelu ispitan je utjecaj duljine preklopa na čvrstoću lijepljenog spoja. Jedna serija ispitnih tijela od aluminija (Al 99,5%) je lijepljena sa epoksidnim, a druga sa akrilatnim ljepilom. Za obje serije varirane su duljine preklopa od 5, 10 i 15 mm. Rezultati ispitivanja su prikazivali maksimalnu silu i maksimalno naprezanje tijekom kidanja ispitnih tijela.
Abstract (english)
In the theoretical part of this thesis classification of joining materials is shortly discussed. Procedure of joining materials with adhesives is more in-depth, with discussions about classification of adhesives, their selection, factors that have effect on strength of adhesive joints, design of a single overlap adhesive joint and pros and cons of using adhesive over other material joining procedures. In the experimental part of this thesis goal was to research the effect of overlap length on strength of adhesive joints. First series of samples made of aluminum (Al 99,5%) was joined with epoxy, while the other series of samples was joined with acrylate adhesive. For both series of samples overlap lengths varied from 5, 10 and 15 mm. Results of research showed maximal force and strain during the breaking of samples.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:247422
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-10-11 12:00:24