prikaz prve stranice dokumenta RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU
Access restricted to students and staff of home institution
undergraduate thesis
RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU
2017. urn:nbn:hr:153:096742
Labudović, Antonio
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Department of Industrial Engineering
Chair for maintenance and computer-supported production

Cite this document

Labudović, A. (2017). RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:096742

Labudović, Antonio. "RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:096742

Labudović, Antonio. "RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:096742

Labudović, A. (2017). 'RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:096742

Labudović A. RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:096742

A. Labudović, "RUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:096742

Please login to the repository to save this object to your list.
Metadata
TitleRUČNO PROGRAMIRANJE CNC TOKARILICE NA ODABRANOM IZRATKU
Title (english)PROGRAMMING OF CNC LATHES TO THE SELECTED WORKPIECE
AuthorAntonio Labudović
MentorTomislav Šarić (mentor)
Committee memberTomislav Šarić (predsjednik povjerenstva)
Committee memberIlija Svalina (član povjerenstva)
Committee memberSara Havrlišan (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
(Department of Industrial Engineering)
(Chair for maintenance and computer-supported production)
Slavonski Brod
Defense date and country2017-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
CNC strojevi su danas neizostavan dio suvremene proizvodnje, toliko da je kratica CNC poprimila značenje profitabilne, precizne i fleksibilne proizvodnje. CNC strojevi su nastali kao odgovor na konstantno rastuće zahtjeve kvalitete, preciznosti i brzine obrade koje je gospodarstvo postavljalo (te i dalje postavlja) pred alatne strojeve. U prvom dijelu rada iznešene su određene teorijske osnove koordinatnih sustava CNC strojeva kao i opisi konstrukcijskih izvedbi i značajki CNC strojeva. U nastavku je opisana tokarilica EMCO Concept Turn 105 na kojoj je izradak i obrađen kao i upravljački sustav Sinumerik 840D. Navedene su i osnovne naredbe kao i ciklusi koji su korišteni za programiranje obrade. Drugi dio se sastoji od potpuno razrađenog tehnološkog procesa sa potpunom dokumentacijom. Naveden je potpun glavni program te svih pet potprograma. Simulacija obrade izratka urađena je u programu WinNC, te je popraćena slikama za svaki alat koji vrši obradu. Na kraju je prikazan završen izradak u simulatoru i slika izratka nakon stvarne izrade.
Abstract (english)
CNC machines are today an infallible part of modern production, so much so that CNC has become a byword for profitable, precise and flexible production. CNC machines themselves were created as an answer to constantly rising demands for quality, precision and machining speed that were being ( and still are ) placed upon tooling machines by the industry. The first part of this thesis is comprised of certain theoretical outlines regarding the coordinate systems of CNC machines and their constructional characteristics. That is followed by a description of the EMCO Concept Turn 105 educational lathe on which the workpiece has been machined as well as a description of Sinumerik 840D control unit. This part also includes a list of basic commands as well as a short explanation for each programming cycle used. The second part is made up of a completely finished technological process with full documentation. Also listed are the main program and the five used subroutines. The machining simulation has been done in the WinNC program and is accompanied by separate images for every special tool used. Showed at the end are the images of the workpiece finished in the simulation and after real machining.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:096742
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-07-14 08:03:01