prikaz prve stranice dokumenta PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA
Access restricted to students and staff of home institution
undergraduate thesis
PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA
2018. urn:nbn:hr:153:736391
Bradarić, Mirna
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Bradarić, M. (2018). PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:736391

Bradarić, Mirna. "PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:736391

Bradarić, Mirna. "PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:736391

Bradarić, M. (2018). 'PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 16 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:736391

Bradarić M. PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 16] Available at: https://urn.nsk.hr/urn:nbn:hr:153:736391

M. Bradarić, "PRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:736391

Please login to the repository to save this object to your list.
Metadata
TitlePRIMJENA DESKRIPTIVNE GEOMETRIJE U TEHNIČKOM CRTANJU STUDIJA STROJARSTVA
Title (english)APPLICATION OF DESCRIPTIVE GEOMETRY INTO THE TECHNICAL DRAWING IN STUDY OF MECHANICAL ENGINEERING
AuthorMirna Bradarić
MentorŽeljko Ivandić (mentor)
Committee memberŽeljko Ivandić (član povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberMirko Karakašić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-02-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su predstavljeni primjeri deskriptivne geometrije u tehničkom crtanju. Sadržajem ovoga završnoga rada pokušalo se pobliže pojasniti svrhu tehničkoga crtanja. Isto tako pojašnjena su pravila koja su bitna za izradu tehničkih crteža. Pobliže su objašnjena pravila projiciranja, metode projiciranja koje se koriste. Kao što znamo sadržaj strojeva, dijelova strojeva je opsežan, te sa za neke slučajeve koriste pojednostavljenja, kao što su sitni prodori, prijelazi, elipse kosih kružnica te dvostruki bridovi. Oni se u nacrtnoj geometriji prikazuju na jedan način a u tehničkom crtanju se koriste pojednostavljeno. Isto tako pobliže su pojašnjeni presjeci. Koji su nam jako potrebni pri opisivanju i crtanju šupljina strojnih dijelova. Pisanjem ovoga rada može se zaključiti da pri izradi tehničkih crteža, nije jednostavno. Potrebno je veliko znanje i vještine pri izradi tehničkih crteža. Prikazati strojne dijelove koji su trodimenzionalni u jednoj ravnini sa dvije dimenzije iziskuje poznavanje projekcija. Svaki strojni dio, stroj, građevina dr. može se prenijeti na crtež tako da je svima razumljiv, te da ga svi znaju koristiti.
Abstract (english)
In this written work, examples of descriptive geometry in technical drawing are presented. The contents of this final paper is tried to explain the purpose of technical drawing. Also, the rules which are important for making technical drawings are explained in this work. Rules of projection like method of projecting which we are using, are explained in more details. As we know the content of machines, machine parts is extensive, and for some cases is normal to using simplifications, such as small penetrations, transitions, ellipses pieces of circles and double edges. In the descriptive geometry they are showing in one way and in technical drawing they are used simplified. Also, more explained are sections. What we really need when we describing and drawing cavity machine parts. By writing this work could be concluded that making technical drawings, is not easy. It's necessary to have a lot of knowledge and skills in the preparation technical drawings. Display hardware parts which are three-dimensional in a plane with two dimensions requires knowledge of projection. Each machine part, machine, building etc. can be transferred to the the drawing so that anyone can understand it, and know how to use it.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:736391
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-02-15 11:10:37