prikaz prve stranice dokumenta PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017
2018. urn:nbn:hr:153:078349
Subotić, Dario
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Subotić, D. (2018). PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:078349

Subotić, Dario. "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:078349

Subotić, Dario. "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:078349

Subotić, D. (2018). 'PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:078349

Subotić D. PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:078349

D. Subotić, "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:078349

Please login to the repository to save this object to your list.
Metadata
TitlePRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE PROIZVODA OZNAKE DS-GN2017
Title (english)CALCULATION AND DESIGN OF TOOL FOR STAMPING PRODUCT LABELED DS-GN2017
AuthorDario Subotić
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu prikazan je proračun i kontrukcija alata za štancanje tj, prosijecanje proizvoda. Proračunavaju se svi dijelovi alata, te se na osnovu dobivenih rezultata provodi konstrukcija kako bi dobili zadani oblik predmeta kojeg štancamo.Nakon proračuna, provedena je tehno-ekonomska analiza u kojoj se proračunavaju troškovi u proizvodnji, te je ispitana isplativost s obzirom da je serija proizvoda tek nešto iznad 30 000 komada. Svaki dio alata ima više izvedbi koje je moguće odabrati, a u radu su navedene sve moguće varijante, ne samo one odabrane. Također, svaki dio je prikazan crtežom koji je u skladu s pravilima tehničkog crtanja.Cilj ovog završnog rada je prikazati i objasniti najpovoljniji tj. najisplativiji stroj odnosno alat za izradu zadanog predmeta.
Abstract (english)
In this paper, the calculation and design of tool for stamping or shearing a productis shown. All parts of a tool were calculated, and based on given results, design was made for th eshape of a stamped product. After the calculation and designing, techno-economic analysis was done in which expenses were calculated and profitability tested out considering that series is made for only a bit above 30 000 pieces. Every part of a tool has multiple variants which can be chosen, in this paper every variant is shown, not just the chosen ones. Also, every part of a tool is presented via drawing which is made with respect to rules of technical drawing. Goal of this paper is to show and explain cheapest or most cost effective machine/tool for production of given object.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:078349
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-01 11:00:20