prikaz prve stranice dokumenta TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA
Access restricted to students and staff of home institution
master's thesis
TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA
2019. urn:nbn:hr:153:775170
Matković, Stipe
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Matković, S. (2019). TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:775170

Matković, Stipe. "TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:775170

Matković, Stipe. "TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:775170

Matković, S. (2019). 'TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 May 2023, https://urn.nsk.hr/urn:nbn:hr:153:775170

Matković S. TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2023 May 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:775170

S. Matković, "TEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:775170

Please login to the repository to save this object to your list.
Metadata
TitleTEHNOLOGIJA IZRADE SREDNJE KOLJEVKE VAGONA ZA PRIJEVOZ KOLUTOVA LIMA
Title (english)PRODUCTION OF A CRANKSHAFT FOR WAGONS FOR THE TRANSPORT OF SHEETROLS
AuthorStipe Matković
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberJosip Cumin (predsjednik povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu kroz kratki uvod opisana je povijest željezničkog prijevoza kako u svijetu tako i u Hrvatskoj, također je odrađen eksperimentalni dio proizvodnje srednje kolijevke za prijevoz kolutova lima. Od trenutka kada je industrijska revolucija krenula pa sve do danas željeznička infrastruktura se mijenja i unapređuje prema zahtjevima tržišta. Kako se razvijala i auto industrija došlo je do potrebe transporta lima od točke A do točke B, u današnje vrijeme dok je auto industrija na vrhuncu i ta potreba za transportom lima se povećala. Kako bi u što manjem trošku prevezli što veću količinu lima konstruiran je vagon s kolijevkama za prijevoz kolutova lima. U eksperimentalnom dijelu opisane su sve točke potrebne za izradu srednje kolijevke za prijevoz kolutova lima, također je opisana i sva potrebna oprema za proizvodnju iste. Od prvog modela kolijevke koji je konstruiran, tokom vremena dolazilo je do revizije i do izmjena postojeće konstrukcije s ciljem poboljšanja sigurnosti u prijevozu, kako sirovine tako i cijelokupnog vagona.
Abstract (english)
This paper presents a short introduction to the history of railway transport both in the world and in Croatia, as well as the experimental part of the production of a crankcase for the transport of sheet rolls. From the moment when the industrial revolution started, and until today, the railway infrastructure is changing and improving according to market demands. As the automotive industry developed, there was a need to transport the files from A to B, while the car industry at the peak and the need for sheet transportation increased. In order to transport as much as possible the amount of the sheet metal, a wagon with cradle for the transport of sheet rolls is constructed. In the experimental part are described all the points required for the production of the intermediate cradle for the transport of sheet rolls, all the necessary equipment for manufacturing the same is also described. From the first model of the cradle that was constructed, over time there was a revision and upgrading of the existing construction to improve transport safety, both raw materials and the entire wagon.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:775170
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-17 09:54:13