prikaz prve stranice dokumenta KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019
2019. urn:nbn:hr:153:295370
Tot, Bruno
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Tot, B. (2019). KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:295370

Tot, Bruno. "KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:295370

Tot, Bruno. "KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:295370

Tot, B. (2019). 'KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:295370

Tot B. KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:295370

B. Tot, "KONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:295370

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUKCIJA ALATA ZA INJEKCIJSKO PREŠANJE ZA OTPRESAK PREMA CRTEŽU PPM1/2019
Title (english)INJECTION MOLD DESIGN FOR MOLDED PART ACCORDING TO DRAWING NUMBER PPM1/2019
AuthorBruno Tot
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazana teorijska podloga i osnovni proračuni potrebni za konstrukciju kalupa za injekcijsko prešanje. Pored toga je razrađena je konstrukcija kalupa za otpresak prema crtežu PPM1/2019. Teorijska podloga sadrži opis standardnih izraza i definicija potrebnih za razumijevanje osnova polimera, opis procesa injekcijskog prešanje i njegove karakteristike te detaljan opis kalupa za injekcijsko prešanja kako bi se moglo pristupiti proračunu i na kraju konstrukciji samog kalupa za injekcijsko prešanje za dani otpresak PPM1/2019. Za potrebu konstrukcije provedeni su tehnološki, reološki, toplinski i mehanički proračuni temeljeni na navedenoj literaturi. Prilikom proračuna neke vrijednosti su pretpostavljene kako bi se moglo omogućiti izvršenje proračuna. Rad sadrži tehničku dokumentaciju potrebnu za izradu kalupa za injekcijsko prešanje. Tehnička dokumentacija ja rađena na temelju provedenih proračuna za konstrukciju kalupa za injekcijsko prešanje. Standardni dijelovi kalupa za injekcijsko prešanje su odabrani putem internet stranice poduzeća MEUSBURGER, a ostali dijelovi su konstruirani prema proračunu.
Abstract (english)
This paper presents theoretical background and basic calculations needed for construction of injection mold. In addition, the construction was elaborated for product based on drawing PPM1/2019. The theoretical background provides a description of the standard terms and definitions needed to understand the basis of the polymer, a description of the injection molding process and its characteristics, and a detailed description of the injection molds to be able to access the calculation and finally the construction of the injection molding tool for the PPM1 / 2019 For the needs of construction, technological, rheological, thermal and mechanical calculations were conducted based on mentioned literature. When calculating, some values they are assumed to allow execution of the calculations. Paper contain the technical documentation required for the production of injection mold. The technical documentation was based on the calculations for mold design for injection molding. Standard mold parts for injection molding were selected through the MEUSBURGER website, and the rest are constructed according to the calculations.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:295370
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-27 06:39:43