prikaz prve stranice dokumenta RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA
Access restricted to students and staff of home institution
master's thesis
RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA
2020. urn:nbn:hr:153:840318
Nišević, Igor
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Nišević, I. (2020). RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:840318

Nišević, Igor. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:840318

Nišević, Igor. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:840318

Nišević, I. (2020). 'RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 22 February 2025, https://urn.nsk.hr/urn:nbn:hr:153:840318

Nišević I. RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2025 February 22] Available at: https://urn.nsk.hr/urn:nbn:hr:153:840318

I. Nišević, "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:840318

Please login to the repository to save this object to your list.
Metadata
TitleRAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA KALUPNIH ALATA ZA IZRADU KOMPLESNOG PROIZVODA
Title (english)COMPUTER AIDED PROCESS PLANNING OF MOLDING TOOLS FOR MAKING A COMPLEX PRODUCT
AuthorIgor Nišević
MentorIlija Svalina (mentor)
Committee memberIlija Svalina (član povjerenstva)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema diplomskog rada je projektiranje tehnološkog procesa za izradu kalupnih alata na osnovu 3D modela dobivenog od izlaznih podataka programa za digitaliziranje crteža. U teorijskom dijelu opisana je računalom podržana proizvodnja, odabrani softver i njegove funkcije te izrada tehničke dokumentacije kalupnih alata. Nakon opisivanja teorijskog dijela pristupilo se dobivanju točaka iz softvera za digitalizaciju crteža Graph Grabber, te izrada 3D modela repnih površina slobodnoletećeg modela klase F1B u programu Siemens NX. Od navedenih 3D modela izrađeni su 3D modeli kalupnih alata. Nakon izrade modela kalupnih alata pristupilo se izradi tehnološkog procesa te je generirana tehnološka dokumentacija. Tehnološki postupak je također izrađen u programskom paketu Siemens NX. Na kraju je dobiveni G-kod učitan u program WinNC gdje je simulacijom utvrđeno da nema kolizija alata te je opisan proces izrade proizvoda pomoću izrađenih kalupnih alata.
Abstract (english)
The topic of graduate thesis is the development of a technological process for the production of molding tools based on the 3D model obtained from the outputs of the digitizing program. The theoretical part describes the computer-aided production, selected software and its functions, and the development of technical documentation of molding tools. After describing the theoretical part, it was possible to obtain points from Graph Grabber drawing software and to create 3D models of the tail surfaces of a free-flying model class F1B in Siemens NX. These 3D models were used for making 3D models of molding tools. After the design of the mold tools, the technological process was started and the technological documentation was obtained. The process was also created in the Siemens NX software package. Finally, the resulting G-code was loaded into the WinNC program, where the simulation determined that there were no tool collisions and described the process of making the product using the molds made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:840318
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-07-10 11:03:55