prikaz prve stranice dokumenta KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t
2020. urn:nbn:hr:153:659443
Marijanović, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Marijanović, T. (2020). KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:659443

Marijanović, Tomislav. "KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:659443

Marijanović, Tomislav. "KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:659443

Marijanović, T. (2020). 'KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:659443

Marijanović T. KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:153:659443

T. Marijanović, "KONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:659443

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUKCIJA I PRORAČUN RADIONIČKE HIDRAULIČNE PREŠE NAZIVNE SILE 5t
Title (english)CONSTRUCTION OF 5t WORKSHOP HYDRAULIC PRESS
AuthorTomislav Marijanović
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberIvan Putnik (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu ovog rada opisane su preše, njihova namjena, podjela i način rada. Naziv ovog rada su hidraulične preše što znači da je ostatak rada baziran na hidrauličnim prešama. Princip rada hidraulične preše zasniva se na Pascalovom zakonu koji je objašnjen u radu. Navedene su prednosti i nedostatci ovih preša te je provedena analiza tržišta za iste preše. Opisane su i konstrukcijske izvedbe (C, ZS, H) preša. U točki konstrukcija preše navedeni su svi potrebni dijelovi za izradu hidraulične preše te su posebno opisani dijelovi hidraulične dizalice. Postupak izrade preše sastoji se od pet koraka koji su detaljno opisani u ovoj točki. Isto tako opisan je princip rada te su navedeni svi vijčani spojevi i opisana uloga opruge na ovoj preši. U proračunu osnovnih elemenata proveden je proračun vijaka na odrez te proračun poprečnih greda na savijanje. Utvrđeno je da svaki vijak može podnijeti opterećenje na koje je izložen. Tehnička dokumentacija sastoji se od sedam crteža, šest radioničkih i jednog sastavnog koji se nalaze u prilogu rada. Zadnja točka ovog rada je zaključak u kojem je ukratko opisan cijeli rad te napravljen osvrt na ključne cjeline.
Abstract (english)
In this bachelor thesis introduction describes the presses, their purpose, classification and mode of operation. As the title said the rest of the work will be based on hydraulic presses. A hydraulic press works on the principle of Pascal's law which was explained later on. The advantages and disadvantages of these presses are stated and market analysis was performed for the same presses. The design versions (C,ZS,H) of the presses are also described. In section “press construction“ all the necesary parts for the production of a hydraulic press are listed and the parts of the hydraulic crane are described in particular. The process of making a press consists of five steps which are described in detail in this part. Mode of operation is portrayed, all bolted joints are listed and the role of the spring on press is also explained. In section “calculation of basis elements“ the calculation of cut screws and the calculation of transverse beams for bending were performed. It has been determined that each screw can endure the load to which it is exposed. The technical documentation consists of seven drawings (six workshop drawings and one component drawing) that are attached. In conclusion a brief description of this bachelor thesis is given and review of key units is made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:659443
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-11 09:08:18