prikaz prve stranice dokumenta POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020
Access restricted to students and staff of home institution
undergraduate thesis
POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020
2020. urn:nbn:hr:153:827976
Vitez, Neven
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Vitez, N. (2020). POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:827976

Vitez, Neven. "POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:827976

Vitez, Neven. "POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:827976

Vitez, N. (2020). 'POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:827976

Vitez N. POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:827976

N. Vitez, "POSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:827976

Please login to the repository to save this object to your list.
Metadata
TitlePOSTUPAK IZRADE OGRADE ZA STOČARSTVO PREMA TEHNIČKOM CRTEŽU PD_NV_2020
Title (english)PROCESS TECHNOLOGY FOR PRODUCTION OF CATLE FENCE FOR TECHNICAL DRAWING PD_NV_2020
AuthorNeven Vitez
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu obuhvaćen je detaljni postupak izrade ogradnog elementa korištenog u stočarstvu dužine 3 metra i visine 1,75 metara prikazanog na nacrtu u prilogu. Uz uvodni dio u kojem su opisane okvirne godišnje, odnosno mjesečne potrebne količine elemenata, posebno je analiziran i postupak savijanja bočnih cijevi. Osim prikazanog cjelokupnog procesa izrade elementa, od nabave potrebnog materijala do isporuke gotovog proizvoda, napravljena je i konstrukcija naprave za sastavljanje i zavarivanje. Naprava je prvenstveno zamišljena i konstruirana za ogradne elemente u standardnoj dužini 3000 mm, kasnije i za ograde dužine 2400 i 3600 mm. Zadatak naprave, prema potrebnim proizvodnim količinama, bio je ubrzati proces prilagodbe graničnika i ostalih geometrijskih značajki pri sastavljanju jednog u odnosu na drugi element, tj. skratiti pripremno-završno vrijeme izrade.
Abstract (english)
This thesis includes a detailed procedure for making a fence element used in cattle breeding, 3 meters long and 1,75 meters high, shown in the attached drawing. In addition to the introductory part, which describes the approximate annual or monthly required quantities of elements, the process of bending the side pipes is specifically analyzed. Besides the entire presented process of making the element, from the supply of the necessary material to the delivery of the finished product, the construction of the device for assembly and welding was made. The device was primarily designed and constructed for fence elements with the standard length of 3000 mm, later also for fences with the length of 2400 and 3600 mm. The task of the device, according to the required production quantities, was to speed up the process of adjusting the stopper and other geometric features when assembling one element in relation to the other element, more specifically to shorten the preparation and final production time.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:827976
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-12 08:49:39