prikaz prve stranice dokumenta ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU
Access restricted to students and staff of home institution
master's thesis
ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU
2016. urn:nbn:hr:153:521128
Briški, Kristijan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Briški, K. (2016). ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:521128

Briški, Kristijan. "ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:521128

Briški, Kristijan. "ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:521128

Briški, K. (2016). 'ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 09 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:521128

Briški K. ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 09] Available at: https://urn.nsk.hr/urn:nbn:hr:153:521128

K. Briški, "ANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:521128

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA NAPREZANJA U JAKO ZAKRIVLJENOM ŠTAPU
Title (english)Analysis strain in a very curved rod
AuthorKristijan Briški
MentorFranjo Matejiček (mentor)
Committee memberFranjo Matejiček (član povjerenstva)
Committee memberTodor Ergić (predsjednik povjerenstva)
Committee memberPejo Konjatić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analizirano naprezanje kod jako zakrivljenog štapa. Na početku rada se opisuje ravninska teorija elastičnosti te temeljne jednadžbe potrebne za izračunavanje naprezanja u jako zakrivljenom štapu. Zatim se provodi izračun naprezanja za zadane podatke. U drugom dijelu provedeno je eksperimentalno određivanje polja naprezanja, te je objašnjena metoda tenzometrije. Eksperimentalnim ispitivanjem dobit će se deformacije preko kojih će se dobiti naprezanja na mjestu postavljene mjerne trake. Nakon ekperimentalnog dijela provedena je numerička analiza naprezanja metodom konačnih elemenata. Pri toj analizi korišten je programski paket Ansys APDL 15.0, te je objašnjeno modeliranje problema i prikaz dobivenih rezultata. Na kraju je provedena usporedba rezultata naprezanja dobivenih anlitičkom metodom teorije elastičnosti, ekperimentalnim ispitivanjem i numeričkom metodom konačnih elemenata.
Abstract (english)
This paper analyzes the strain in a very curved rod. Firstly, planar theory of elasticity and fundamental equations necessary to calculate the strain in a very curved rod were described in detail. Then the strain for default data is calculated. In the second part, there was experimental determining the stress fields. Also, the method of Tensometry was explained, which was used during the experimental analysis. Experimental tests will get deformation over which we will get the stress set in place of measuring tape. After experimental part, it was conducted the numerical stress analysis by finite element method. For this analysis was used software package Ansys APDL 15.0, and is explained modeling of plate and analysis of the solutions in this program. At the end of this paper, there is comparison of stress results obtained with analytical method theory of elasticity, experimental tests and numerical finite element method.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:521128
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-27 10:05:41