prikaz prve stranice dokumenta KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA
2016. urn:nbn:hr:153:353898
Maglica, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Maglica, T. (2016). KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:353898

Maglica, Tomislav. "KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:353898

Maglica, Tomislav. "KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:353898

Maglica, T. (2016). 'KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:353898

Maglica T. KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:353898

T. Maglica, "KONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:353898

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUIRANJE ODLJEVAKA OD ALUMINIJSKIH LEGURA
Title (english)Design of aluminum alloy castings
AuthorTomislav Maglica
MentorDaniel Novoselović (mentor)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazan kratki osvrt na postupak lijevanja. Opisan je postupak lijevanja, nabrojane su različite vrste lijevanja i vrste kalupa koje koristimo pri lijevanju. Nadalje su navedeni zahtjevi koje konstruktori moraju uzeti u obzir pri odabiranju aluminijske legure za postupak lijevanja kao i odabira zahtijevanog postupka lijevanja. Zadatkom je trebalo analizirati pravila konstruiranja odljevaka od aluminijskih legura kojih se potrebno pridržavati kako bi se odljevak proizveo bez pogrešaka koje mogu nastati u proizvodnji i kako bi odljevak postigao željena uporabna svojstva. Navedene su pogreške odljevaka koje mogu nastati tokom lijevanja i postupci pomoću kojih uklanjano uzroke nastajanja navedenih pogrešaka. U radu su navedene i toplinske obrade koje primjenjujemo na odljevcima. Opisana je suradnja svih sudionika koji su uključeni u proizvodnji polazeći od konstruktora, ljevaonice pa do kupca. Zajednička suradnja pridonosi uspješnosti nastanka odljevaka. Na samom kraju je navedena tehno - ekonomska analiza čiji je izračun prijeko potreban prije samog početka razvoja, konstruiranja i proizvodnje odljevaka.
Abstract (english)
This paper presents a brief overview of the process of casting. The procedure of casting, listed the different types of casting molds that are used in casting. They further stated requirements that designers must consider when choosing the aluminum alloy for casting processes and selecting the required casting procedure. The task is supposed to analyze the rules of design castings of aluminum alloy that should be followed in order to produced cast without defects that can occur in the production and to achieve the desired performance characteristics of castings. These castings defects that may arise during the casting and the procedures by which, removed the causes of the defects. The paper also lists the heat treatment that apply to castings. Described the cooperation of all parties involved in production starting from the constructor, the foundry and the customer. Joint cooperation contribute to success of the production of castings. At the end there is given techno - economic analysis, whose calculation is indispensable prior to the beginning of the development, design and manufacturing of castings.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:353898
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-04 10:39:31