prikaz prve stranice dokumenta ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA
Access restricted to students and staff of home institution
master's thesis
ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA
2017. urn:nbn:hr:153:531269
Janjić, Ivan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Janjić, I. (2017). ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:531269

Janjić, Ivan. "ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:531269

Janjić, Ivan. "ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:531269

Janjić, I. (2017). 'ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:531269

Janjić I. ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:153:531269

I. Janjić, "ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:531269

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA ZAOSTALIH NAPREZANJA U ZAVARENOM SPOJU CIJEVNOG PRIKLJUČKA
Title (english)ANALYSIS OF RESIDUAL STRESSES IN WELDED JOINT OF HOSE
AuthorIvan Janjić
MentorFranjo Matejiček (mentor)
Committee memberFranjo Matejiček (član povjerenstva)
Committee memberDražan Kozak (predsjednik povjerenstva)
Committee memberPejo Konjatić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analizirano ekvivalentno naprezanje na ispitnim uzorcima izrađenim od nehrđajućeg čelika. Na početku rada se opisuje ravninska teorija elastičnosti te temeljne jednadžbe potrebne za izračunavanje ekvivalentnog naprezanja komora. Nakon toga je provoden izračun naprezanja za zadane podatke. U drugom dijelu rada opisan je eksperimentalni dio. Ovdje je primjenjivana metoda određivanja zaostalih naprezanja pomoću tenzometrije mjereći deformacije pomoću kojih su se izračunala naprezanja u neposrednoj blizini zavara. Provedena je analitička i numerička analiza za slučaj opterećenja ispitnog uzorka pretpostavljenim unutrašnjim tlakom. Provedena je numerička analiza zaostalim naprezanjima pri zavarivanju preko toplinskih naprezanja za neku pretpostavljenu temperaturnu razliku. Ova analiza se temelji na metodi konačnih elemenata. Proračun naprezanja proveden je pomoću programskog paketa ANSYS 16.2 Workbench. Na kraju je provedena usporedba rezultata i to između rješenja dobivenih teorijom elastičnosti i numeričkih rješenja bez utjecaja zaostalih naprezanja. Provedena je usporedba rezultata između eksperimentalnih mjerenja ovisno o debljini komore tj. toplinskom unosu. Kod numeričkih rješenja također je pokazan utjecaj zaostalih (toplinskih) naprezanja o debljini komore tj. toplinskom unosu.
Abstract (english)
This paper analyzes the equivalent stress on stainless steel test specimens. At the beginning of the paper, the plane theory of elasticity and basic equations needed to calculate the equivalent stress of the chamber is described. After that, the calculation of stress for the given data was performed. The second part of the paper describes the experimental part. Here is a method of determining residual stresses by means of tensometry that measures the deformation by which stresses are calculated in the vicinity of the weldment. An analytical and numerical analysis for the case of the stress of the test speciment by internal pressure was performed. Numerical analysis of residual stresses in welding via thermal stresses for a presumed temperature difference was performed. This analysis is based on finite element method. The stress calculation was performed using the ANSYS 16.2 Workbench program package. In the end, a comparison of the results between the solutions obtained by the theory of elasticity and numerical solutions without the effect of residual stress was performed. A comparison of the results between experimental measurements was made depending on the thickness of the chamber, ie., heat input. Numerical solutions also show the influence of residual (thermal) stresses on the thickness of the chamber, ie. heat input.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:531269
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-27 11:47:59