prikaz prve stranice dokumenta ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE
Access restricted to students and staff of home institution
undergraduate thesis
ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE
2017. urn:nbn:hr:153:266288
Grabić, Petar
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Grabić, P. (2017). ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:266288

Grabić, Petar. "ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:266288

Grabić, Petar. "ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:266288

Grabić, P. (2017). 'ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 09 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:266288

Grabić P. ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 April 09] Available at: https://urn.nsk.hr/urn:nbn:hr:153:266288

P. Grabić, "ANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:266288

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA SLOŽENOG NOSAČA OPTEREĆENOG NA SAVIJANJE
Title (english)COMPLEX BEAM ANALYSIS SUBJECTED TO BENDING
AuthorPetar Grabić
MentorDražan Kozak (mentor)
Committee memberDražan Kozak (član povjerenstva)
Committee memberMarko Katinić (član povjerenstva)
Committee memberDarko Damjanović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je općenito opisan gredni nosač opterećen na savijanje te nešto o naprezanjima i deformacijama pri savijanju grednog nosača. Navedene su neke metode rješavanja problema grednog nosača opterećenog na savijanje te prikazane na primjeru složenog grednog nosača opterećenog na savijanje. U prvom dijelu rada opisuje se gredni nosač, savijanje grednog nosača, te razvoj teorije savijanja štapa. Drugim dijelom rada prikazuju se naprezanja i deformacija pri čistom savijanju, normalna i posmična naprezanja pri savijanju silama te glavna naprezanja i trajektorije naprezanja. Treći dio pokazuje proračun čvrstoće nosača opterećenog na savijanje, diferencijalnu jednadžbu elastične linije, metodu direktne integracije elastične linije i metodu analogne grede. U četvrtom dijelu je prikazano određivanje progiba i nagiba na primjeru složenog grednog nosača opterećenog na savijanje.
Abstract (english)
This work presents describing a bending beam and something about strain and deformation of a beam, which is caused by bending. There are listed some methods of solving a bending beam problem. Each of listed methods are described on the same example of a beam. First part of this work describes a beam, bending of a beam and the history of bending theory. Second part shows strain and deformation of pure bending, normal and shear stresses of bending with forces and main stresses with it's trajectoryes. Third part is introduction in strenght calculation of a bending beam. In this part differential equation of deflection line and method of direct integration of deflection line are described. Also, method of analog beam is described. Fourth part is about solving a concrete example of a bending beam with three different methods.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:266288
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-10-02 06:17:07