prikaz prve stranice dokumenta KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA
Access restricted to students and staff of home institution
master's thesis
KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA
2017. urn:nbn:hr:153:032085
Turinski, Dražen
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Turinski, D. (2017). KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:032085

Turinski, Dražen. "KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:032085

Turinski, Dražen. "KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:032085

Turinski, D. (2017). 'KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 09 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:032085

Turinski D. KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 09] Available at: https://urn.nsk.hr/urn:nbn:hr:153:032085

D. Turinski, "KONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:032085

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUKCIJSKI RAZVOJ STROJA ZA VAĐENJE LUKA
Title (english)DESIGN AND DEVELOPMENT OF ONION HARVESTER
AuthorDražen Turinski
MentorDražan Kozak (mentor)
Committee memberDražan Kozak (član povjerenstva)
Committee memberŽeljko Ivandić (član povjerenstva)
Committee memberAntun Stoić (predsjednik povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-05-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu je prikazan praktični primjer konstrukcijskog razvoja stroja za vađenje luka. Stroj je prvo modeliran pomoću programskog paketa Solidworks 2012, nakon čega su prikazani sastavni dijelovi koji su proračunati analitički i numerički. Numerička analiza pomaka i naprezanja odrađena je u modulu „Static Structural“ koji pripada programskom paketu Ansys Workbench 16.0, koji je baziran na metodi konačnih elemenata. Nakon analize naprezanja i pomaka pristupilo se optimizaciji nosivih dijelova stroja za vađenje luka, koja je izvršena pomoću posebnog modula „Direct Optimization“ koji također pripada programskom paketu Ansys Workbench 16.0. Prikazane su razlike rezultata početne i krajnje konstrukcije. U četvrtom poglavlju je propisana tehnologija izrade optimiranog rješenja stroja za vađenje luka. Tijekom izrade stroja korištene su neke od tradicionalnih metoda oblikovanja deformiranjem i toplinske obrade metala kao što je tradicionalno kovanje i kaljenje raonika. Pri završetku izrade stroja za vađenje luka provedena je provjera učinkovitosti stroja u stvarnim uvjetima rada.
Abstract (english)
This thesis shows the practical example of the structural development of the machine for extracting the onion. The machine was first modeled using the software package Solidworks 2012. All components of the machine were calculated analytically and numerically. Numerical analysis of displacement and strain was worked out in the module "Static Structural" within to the software package Ansys Workbench 16.0, which is based on the finite element method. After analyzing the strain and displacement, we approached the optimization of load-bearing parts of the machine for extracting onion, which was through the operation of the sub modeling using a special module "Direct Optimization" which is also part of the software package Ansys Workbench 16.0. Then, the resulting differences of the starting and ending construction were shown. In the fourth chapter the technology of production of the optimized solutions for machine extraction the onion was prescript. During the creation of the machine there were used some of the traditional methods of metal forming and heat treatment of metals such as forging and guenching blade. With the completion of the machine for extraction the onion the verification of the effectiveness of the machine was carried out under the actual operation conditions.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:032085
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-10-16 06:07:44