prikaz prve stranice dokumenta ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA
Access restricted to students and staff of home institution
master's thesis
ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA
2018. urn:nbn:hr:153:520127
Kvesić, Berislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Kvesić, B. (2018). ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:520127

Kvesić, Berislav. "ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:520127

Kvesić, Berislav. "ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:520127

Kvesić, B. (2018). 'ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 10 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:520127

Kvesić B. ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 April 10] Available at: https://urn.nsk.hr/urn:nbn:hr:153:520127

B. Kvesić, "ANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:520127

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA UTJECAJA RADNE TEMPERATURE NA MEHANIČKA SVOJSTVA MODELA IZRAĐENIH POSTUPKOM 3D ISPISA
Title (english)INFLUENCE OF WORKING TEMPERATURE ON MECHANICAL PROPERTIES OF 3D PRINTED MODELS
AuthorBerislav Kvesić
MentorTomislav Galeta (mentor)
Committee memberTomislav Galeta (član povjerenstva)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analiziran utjecaj temperature ispisa i temperature podloge na mehanička svojstva ispitivanih uzoraka. Utjecaj temperature najvažniji je čimbenik pri trodimenzionalnoj izradi modela. Upravo iz tog razloga, prikazana je izrada savojnih i rasteznih ispitnih uzoraka uz promjenu temperature ispisa i temperature podloge. Eksperimentalnim putem utvrđeno je dimenzijsko odstupanje uzoraka od zadanih parametara tijekom 3D ispisa, što je i glavni nedostatak ovakve vrste pisača. Rezultati analize ukazuju da temperatura ispisa i podloge nema značajnijeg utjecaja na mehanička svojstva ispitivanih uzoraka.
Abstract (english)
This paper analyzes influence of the printing temperature and bed temperature on the mechanical properties of the tested samples. Temperature influence is the most important factor in the three-dimensional product printing. This is a reason why the printing production of bendy and stretchy test specimens has been shown, with the change of the printing temperature and the temperature of the printer bade. In experimental testing dimensional deviation of samples from the default parameters was determined during 3D printing, which is also the main deficiency of this type of printer. The results of the analysis indicate that the printing and bad temperature has no significant effect on the mechanical properties of the tested samples.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:520127
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-28 08:03:33