prikaz prve stranice dokumenta PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019
2019. urn:nbn:hr:153:183328
Stanišak, Tin
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Stanišak, T. (2019). PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:183328

Stanišak, Tin. "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:183328

Stanišak, Tin. "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:183328

Stanišak, T. (2019). 'PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 07 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:183328

Stanišak T. PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 07] Available at: https://urn.nsk.hr/urn:nbn:hr:153:183328

T. Stanišak, "PRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:183328

Please login to the repository to save this object to your list.
Metadata
TitlePRORAČUN I KONSTRUKCIJA ALATA ZA ŠTANCANJE ZA PROIZVOD PD_TS_2019
Title (english)STAMPING TOOL CONSTRUCTION FOR PRODUCT PD_TS_2019
AuthorTin Stanišak
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberDubravko Šotola (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Štancanje kao tehnika obrade materijala koristi se stoljećima, a postoje i dokazi koji upućuju na to da je i pračovjek koristio štancanje kako bi si olakšao neke radnje. Štancanje je napredovalo kroz stoljeća pa se u 19. stoljeću pojavljuju kompliciraniji alati u postolarskoj industriji. U današnje vrijeme, štancanje ima vrlo važnu ulogu u obradi materijala. Alati postaju sve složeniji i kompliciraniji, a izradci su sve bolji i precizniji. Prvo poglavlje rada sadrži uvod u sam rad i uvod u štancanje. Teme koje će biti obrađene opisivat će načine štancanja, podjelu štanci i ostale opće informacije vezane uz samu tehniku štancanja. U drugom poglavlju vršit će se proračun iskorištenja materijala koji je jedan od glavnih pokazatelja isplati li se obrada uopće vršiti ovim postupkom. Treće poglavlje sadrži proračun sila, momenata, naprezanja i deformacija. To su najvažniji proračuni koji će odrediti konstrukciju alata. Četvrto će poglavlje opisati konstrukciju alata kroz proračun dimenzija ploča, žiga i matrice kako bi se prema dobivenim vrijednostima mogao konstruirati efektivan alat. Peto poglavlje bit će zaključak i osvrt na rad.
Abstract (english)
Die-pressing as a way of processing materials is being used for centuries. There are even evidence which suggest that the first-men used die-pressing as a mean to make their lifes easier. Die-pressing made a progress throughout centuries and in the 19th century the tools for die-pressing are becoming more complex and are being used by shoemakers. In today's world, die-pressing plays an important role in processing materials. Stamping tools are more complex and final products are better and more precise. The first chapter is a general introduction to this paper and into general die-pressing. It will cover different ways of pressing and stamping, classification of different stamps and general information about the process itself. Second chapter consists of calculation of the waste made by die-pressing. This is one of main indicators whether the right aproach to make the final product was chosen. Third chapter is calculation of needed force, moments of exertion, strains and deformations. Those calculations are the ones that will determine the design of the die-pressing tool. Forth chapter will describe the design of the tool throughout the calculation of segments of the tool. Fifth chapter is a the final conclusion and review of the whole paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:183328
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-26 11:58:52