prikaz prve stranice dokumenta Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016
Access restricted to students and staff of home institution
undergraduate thesis
Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016
2016. urn:nbn:hr:153:892725
Gunčević, Filip
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Gunčević, F. (2016). Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:892725

Gunčević, Filip. "Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:892725

Gunčević, Filip. "Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:892725

Gunčević, F. (2016). 'Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:892725

Gunčević F. Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:153:892725

F. Gunčević, "Proračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:892725

Please login to the repository to save this object to your list.
Metadata
TitleProračun i konstrukcija alata za štancanje proizvoda oznake FP-GN2016
AuthorFilip Gunčević
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu će biti prikazan postupak, odnosno proračun i konstrukcija alata za prosijecanje (štancanje) proizvoda. Proračunavaju se osnovni dijelovi alata, te se prema dobivenim rezultatima provodi konstrukcija alata kako bi na kraju dobili zadani obliku predmeta koji prosijecamo. Također, nakon proračuna alata za prosijecanje provest će se i tehno-ekonomska analiza alata, što znači da će biti proračunati troškovi u proizvodnji takvoga alata te koliko je sve isplativo s obzirom da je alat konstruiran radi male serije proizvoda od 40 000 komada. Alat za prosijecanje sastoji se od više dijelova, a za svaki zasebni dio postoji više izvedbi koje je moguće odabrati za konstrukciju, te su osim odabranih dijelova objašnjene i prikazane ostale varijante koje je također moguće odabrati u konstrukciji. Svaki od odabranih dijelova prikazan je crtežom, a cilj ovoga rada je dobiti funkcionalan alat sa što manjim troškovima i što je moguće većom preciznošću izrade proizvoda.
Abstract (english)
In this paper, the process of calculation and design of shearing (stamping) tool will be shown. The basic tool components are calculated, and according to calculations, design is being carried out in order to get the wanted shape of a stamped object. Also, after the calculations of the shearing tool, a technological and economical analysis of the tool is being carried out, which means that all of the expenses of producing such a tool will be calculated and their rentability of it, since the tool is designed for small series production which has less than 40 000 units. Shearing tool is made out of multiple parts, and for every single part there are multiple variations which can be choosed for design, and along with chosen parts, other variations which are possible in a design are explained too. Every one of the selected parts is shown with a drawing, and the goal of this paper is to get a functional tool with the least possible expenses and with the highest possible precision of unit production.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:892725
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-08 08:58:06